Elena's Legacy. Texts written by Elena, excerpts from texts she liked, her artworks.: Carpenter CV

Carpenter CV

Carpenter Resume
Another Carpenter CV
Another Carpenter Resume
Finished Carpenter
Carpenter's Apprentice

Carpenter Resume

Seeking employment with a company or business that is reliable and requires honest, hard working people to succeed. Preferably somewhere in which I can contribute to the team and find room to grow within the place of business.

Work Experience

Carpenter

JBConstruction

June 2007 to Present

This is manual work at the journeyman level in both rough and finished carpentry.

Work involves the construction and maintenance of structural woodwork and other woodwork requiring the use of standard carpenter tools and power driven woodworking machinery. Assignments are normally made orally or in the form of sketches or blueprints.

Finish Carpenter

James Grove Construction

May 2004 to July 2007

Job duties specialized in building custom cabinetry, which lead to the installation process. Other aspects of job duties included but were not limited to running all trim (crown molding, casing, etc.), some plumbing, hanging dry wall, demolition, and basic electrical work.

Carpenter

G & M Construction

May 2000 to May 2004

Responsibilities were to read plans and layout plate for framing accordingly. Additionally required to cut load list; which consisted of headers and cripples, frame and stand walls, and lastly plumb and line after walls had been stood.

Salesman

G & M Construction

August 1997 to April 2000

Daily responsibilities were to meet and greet customers on the sales floor, answer all inquiries on vehicles and pricing, generate payment plans suitable to customers' needs, and accommodate all other sales involved.

Education

Graphic Design

Mt. San Antonio College

August 1996 to June 1997

High School Diploma

San Dimas High School

September 1991 to July 1997

Skills

Some general plumping and electrical work, very familiar with blue prints, extensive experience with power tools, cutting materials, installing cabinets, frame work, welding, metal fabrication, good people skills, and very comfortable with customer service

Carpenter - skills which are always needed everywhere. Photo by Elena

Carpenter CV

Self-Employed

Lyndhurst, NJ

To work as a carpenter whereby my vast experience in constructing, erecting, installing, finishing and repairing of both wooden and metal structures and fixtures in residential and commercial buildings will be utilized. Moreover, also has ample experience in servicing and installing all types of heating and air-conditioning equipment.

Work Experience

Carpenter – self-employed

Lyndhurst, NJ

2019 to Present

Operate all types of woodworking equipment to include: table saw, radical saw, planer, jointer, drill, etc.

Perform window, door, and minor roof repairs.
Install hang doors.
Demolish and/or construct interior building partitions.
Perform finish carpentry work, i.e., moldings, trim work, cabinets, etc.
Hang drywall as required and perform drywall finishing.
Install drop ceilings when necessary.
Install vinyl title.
Respond in an expeditious and timely manner to all work requests regarding carpentry expertise.
Comply and follow college safety procedures when performing assigned responsibilities.
Assist in loading and unloading building materials from delivery trucks.

Carpenter

The Great Atlantic Tea Co

2006 to 2009

Operate all types of woodworking equipment to include: table saw, radical saw, planer, jointer, drill, etc.

Perform window, door, and minor roof repairs.
Install hang doors.
Demolish and/or construct interior building partitions.
Perform finish carpentry work, i.e., moldings, trim work, cabinets, etc.
Hang drywall as required and perform drywall finishing.
Install drop ceilings when necessary.
Install vinyl title.
Respond in an expeditious and timely manner to all work requests regarding carpentry expertise.
Comply and follow college safety procedures when performing assigned responsibilities.

Casual employee at Platinum Corporate Office

2005 to 2007

Heating and Air-conditioning Mechanic

Assist in planning, assigning and supervising the installation, servicing and repairing of HVAC systems.
Wrap pipes in insulation and secures it in place with cement or wire bands.
Lay out and connect electrical wiring between controls and equipment according to wiring diagram, using electrician's hand tools.
Reassemble equipment and start unit to test operation.
Measure, cut, thread, and bend pipe or tubing, using pipefitter's tools.
Cut and drill holes in floors, walls, and roof to install equipment, using power saws and drills.
Adjust system controls to setting recommended by manufacturer to balance system, using hand tools.
Inspect and test system to verify system compliance with plans and specifications and to detect malfunctions.
Discuss heating-cooling system malfunctions with users to isolate problems or to verify malfunctions have been corrected
Inspect inoperative equipment to locate source of trouble.
Perform other duties as assigned.

Forklift Operator and Sanitation Crew

2000 to 2002

Licensed/Trained as a Forklift operator responsible for transport of heavy loads from one point to another

Responsible for cleaning the machinery and floors; move product to allow cleaning and use of high pressure water hoses and squeegees to clean floors

Responsible for cleaning all product contact surfaces throughout the plant to comply with the requirements of the Canadian Food and Inspection Agency

Additional Information

More than ten years of experience in both fields

Sound knowledge of residential construction and remodeling trades, practices, procedures, techniques, tools and equipment, materials, specifications, quality control, cost control, and safety.

Proficient at the following tasks: stain-grade trim work, hang doors, drill and set door hardware, set windows, layout for stairs and common rafters, etc.

Great interpersonal and communications skills.

Exceptional ability to understand verbal and written instructions.

Strong ability to organize assigned tasks, for completion alone or with help.

Immense ability to perform tasks on all areas and aspects of construction project.

Thorough knowledge of approved methods and practices in installing, maintaining, and repairing heating and air conditioning equipment including controls and other related fixtures, with thorough knowledge in one area (air conditioning or heating).

Knowledge of the laws, regulations, and safety procedures pertaining to heating and air-conditioning equipment.

Remarkable knowledge of electrical circuits and schematics; plumbing and equipment controls.

Carpenter

Video Set Group Technology Corporation

Great Neck, NY

Receive the employment with the woodworking company offering the post

Work Experience

Carpenter

Video Set Group Technology Corporation

Great Neck, NY

March 2012 to Present

Conducted numerous interior wall and ceiling finish work
Installed a large number of interior doors and hardware
Installed cabinets and countertops
Fashioned and implemented interior trim
Conducted finish flooring work
Built several stairways
Worked with power tools, hand tool and woodworking machines
Experience with plumbing, welding and electric works
Deck construction, custom furniture design and construction
Performed wood furniture restoration
Installed windows, doors, locks

Carpenter

Wallmart

Great Neck, NY

May 2000 to June 2011

Performed floor framing, wall framing and ceiling framing

Conducted numerous interior wall and ceiling finish work

Installed a large number of interior doors and hardware

Installed cabinets and countertops

Fashioned and implemented interior trim

Conducted finish flooring work

Built several stairways

Carpenter Assistant

Ostin Woodworks

Great Neck, NY

September 1998 to April 2000

Installed cabinets and countertops

Conducted numerous interior wall and ceiling finish work

Installed a large number of interior doors and hardware

Carpenter

Municipal Daily newspaper

March 1996 to August 1998

Great Neck, NY

Managed two large brick houses project and at least 20 small projects (full and partial renovations)

Planned and participated in concrete works and foundation building

Performed floor framing, wall framing and ceiling framing

Directed and participated in roof frame construction

Education

Diploma in Technology

Great Neck Community College, NY

1992 to 1998

Certificate in Design

New Image College of Design

Brooklyn, NY

April 1995 to April 1997

Finished Carpenter CV

20 years Finished Carpentry including interior/exterior door installation, interior molding, window/ slider installation and all cabinetry.

Work Experience

Finished Carpenter
Deyoung Woodworking
Torrance, CA
Length: 7 years

Duties: All finished carpentry including moldings, doors, windows, and woodworking. Building and/or installing cabinets, stairs, floors and drywall. Some experience in exterior patio coverings and decking.

Cabinet Maker

Dibernardo Woodworking
Torrance, CA
Length: 3 years
Duties: Cabinet making
Job Title: Cabinet Maker

Employer: Glotz Woodworking, El Segundo CA

Length: 3 years
Duties: Cabinet making
Job Title: Cabinet Maker

Employer: The Trick Shop, Gardena CA

Length: 2 years
Duties: Cabinet making

Skills: MOLDING, WINDOWS, CABINETRY, FLOORING, DOORS, WOODWORKING

CDL: Class C (passenger car)

Comments: I am very experienced in woodworking and home improvement. I have my own truck w/ a lumber rack and tools. I am always on time and take pride in my work.

Carpenter's Apprentice

Work Experience

Carpenters Apprentice

R & R Carpentry

June 2001 to Present

Fabricate parts, using woodworking and metalworking machines.

Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers.

Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.

Dig or direct digging of post holes and set poles to support structures.

Erect forms, framework, scaffolds, hoists, roof supports, or chutes, using hand tools, plumb rule, and level.

Cut or saw boards, timbers, or plywood to required size, using handsaw, power saw, or woodworking machine.

Mark cutting lines on materials, using pencil and scriber.

Measure materials or distances, using square, measuring tape, or rule to lay out work.

Cut or saw boards, timbers, or plywood to required size, using handsaw, power saw, or woodworking machine.

Assemble and fasten material together to construct wood or metal framework of structure, using bolts, nails, or screws.

Bore bolt holes in timber, masonry or concrete walls, using power drill.

Shop Worker

R & R Carpentry

July 1998 to May 2001